android originals
acquired a Taig
Micro Lathe kit with $250 from one of the taxpayer stimulus
packages for use in developing possible patentable devices. This
section deals with some of the modifications and applications
developed by android originals, including:
Intro - this introduction page
Motor and Pulley Setup - Using an arbor and extra pulley
set to produce lathe speeds from about 155 to 11,900 RPM
Top Slide Angle - Setting the top slide angle with a vernier
protractor and a jig extending the length of the cross slide
Top Slide Boring - An adapter to use a 1/2 inch drill chuck
on the top slide to bore holes more accurately than with the
tailstock.